Oki Pro1040 - Deleting or Updating a Printer Driver; Deleting a Printer Driver

- 97 -
Deleting or Updating a Printer Driver
⿟
Deleting or Updating a Printer Driver
Deleting a Printer Driver

Windows PCL Printer Driver
Note
z
PC administrator privileges are required.
z
Restart the computer, and then delete the driver.
1
Click [Start] and select [Control Panel]
in [Windows System].
2
Click [View devices and printers].
3
Right-click the [Pro1050 PCL6] icon,
and then select [Remove device].
4
If a verification message is displayed,
click [Yes].
Note
z
If a message appears while the device is in use,
restart the PC, and then perform steps 1 and 2 of
this procedure again.
5
Select one of the icons in [Devices
and Printers], and click [Print server
properties] in the top bar.
6
Select the [Drivers] tab.
7
Click if [Change Driver Settings] is
displayed.
8
Select the driver to be deleted, and
click [Remove].
9
If a message asking whether to delete
the drivers only, or the drivers and
packages from the system, select to
delete drivers and packages, and click
[OK].
10
If a verification message is displayed,
click [Yes].
11
If the [Remove Driver Package] dialog
box is displayed, click [Delete]>[OK].
Note
z
If you cannot cancel, restart the PC, and then
perform steps 4 to 10 of this procedure again.
12
Click [OK] in the [Print server
properties] dialog box.