- 156 -
Using a Web Browser to Configure the Network Setup
Calibration
◎
Item Description
Normal
Setting
Adjusts the density of each color and other print
quality settings.
Customize
Menu
Used to perform density and registration
adjustment.
Links
Item Description
Links Displays links configured by the administrator and
links configured by the manufacturer.
Edit Links Allows administrator to set any URL. Up to five
support links and five other links can be registered.
Be sure to include http:// when entering the URL.
Changing an Administrator
Password
You can use the procedure below to change
the password for logging in to the printer as an
administrator.
1
Click [Admin Setup] > [Management].
2
Click [Change Password].
3
In [New Password], enter the new
password. In [Verify Password], enter
the new password again.
Note
z
The password will appear on the screen as a series
of dots (
●●●●●
) as you enter it.
z
You can enter from 6 to 12 alphanumeric English
characters for a password.
z
Note that passwords are case-sensitive, so enter
upper-case and lower-case letters correctly.
4
Click [Submit].
To Next Page
Loading...
