Oki Pro1040 - Adding a Printer; Starting up the Web Browser

- 192 -
OKI LPR Utility
Adding a Printer
You can use the procedure below to change the
print destination port to an OKI LPR port.
Note
z
You cannot configure this setting for a printer that is
already registered with the OKI LPR Utility. To change the
port in this case, select [Reset Printer].
1
On the [Remote Print] menu, select [Add
Printer].
2
Use [Printer Name] to select the
name of the printer to be added, use
[IP Address] to enter the printer's IP
address, and then click [OK].
Note
z
[Printer Name] is displayed only if a printer driver has
been added to the [Devices and Printers] folder. It does
not appear when the printer is configured as a network
printer.
Memo
z
You can search for Oki Data printers on the network by
clicking [Discover].
The printer is added to the main window.
Starting Up the Web
Browser
The OKI LPR Utility starts up the web browser
for configuration of printer network settings and
menu settings.
1
Select this printer.
2
On the [Remote Print] menu, select
[Web Setting].
Memo
z
If the web port number has changed, use the
procedure below to change the OKI LPR Utility port
number setting.
(1)
Select this printer.
(2)
On the [Remote Print] menu, select
[Confirm Connections].
(3)
Click [Details].