- 74 -
Table of Setting Items in the Control Panel Menu Screen
[Print Statistics]
Note
z
To enter this menu, it is necessary to enter the [Password].
z
In the default factory settings, the password is [0000].
z
Shaded areas are factory-set values.
Item Value Description
Usage Report Enable
Disable
Enables/disables the Usage Report function.
Supplies Report
*1
Enable
Disable
Sets whether or not to display the number of
consumables replacements.
Reset Main Counter
*1
Execute Resets the main counter aggregate value.
Reset Supplies Counter
*2
Execute Resets the number of consumables replacements.
Change
Password
*1
New Password **** Sets the new password to be entered in [Print
Statistics].
Verify Password **** Sets a new password to be entered in the [Print
Statistics] for which [New Password] has been set.
*1: Not displayed if [Disable] is set for the control panel [Print Statistics] > [Usage Report] item.
*2: Not displayed if [Disable] is set for the control panel [Supplies Report] item.
To Next Page
Loading...
