- 141 -
Installing a Utility
Installing a Utility
Use the procedure below to install the utility you
want to use.
1
Insert the "Software DVD-ROM" into the
computer.
2
On the "AutoPlay" screen that appears,
click [Run Setup.exe].
3
When the "User Account Control"
window is displayed, click [Yes].
4
Read the "Software License Agreement",
and click [Accept].
5
Select the printer connection method,
and then click [Next]. (In this example,
we will select network connection.)
6
Start searching for a printer. After
supported printers are detected, select
this printer from the list and then click
the [Next] button.
7
Click [Custom Install].
8
Select the check box next to the
software you want to install, and then
click [Install].
9
Confirm that the correct software is
selected, and then click [Start].
To Next Page
Loading...
