- 115 -
Adjusting Color with a Printer Driver
Simulating Print Results
The printer adjusts CMYK color data to simulate
the characteristics of ink, such as that used in
offset printing.
The ICC profiles registered as standard are
described below.
z
RGB Profiles
- sRGB
- AdobeRGB
z
CMYK Input Profiles
- SWOP
- ISO Coated
- Japan Color
- JMPA
Note
z
Enabled when [Color Mode] is set to either [Simple
Adjustment] or [Graphic Pro].
Windows PCL Printer Driver
1
Open the file to be printed.
2
Select [Print] in the [File] menu.
3
Click [Preferences] (or [Properties]).
4
On the [Color] tab, click [Detail], and
then select [Graphic Pro].
5
Select [Printer Simulation], and then
use the list under [Simulation Target
Profile] to select the ink characteristics
you want to simulate.
6
Click [OK].
7
Print.
To Next Page
Loading...
