Oki Pro1040 - Simple Color Matching (Simple Adjustment)

- 110 -
Adjusting Color with a Printer Driver
Simple Color Matching
(Simple Adjustment)
Color matching is used on a printer for
reproduction of the RGB colors required to print
from word processor, spreadsheet, presentation,
and other similar software.
Color matching is implemented using a special
accelerator (ASIC) that is built into the printer.
When converting RGB color space print data to
the printer CMYK color space, color matching
processing is applied.
Note
z
In the case of a Windows PCL printer driver, color
matching is not applied even if [Automatic] or [Simple
Adjustment] is selected for the CMYK color space print
data. In this case, select "Graphic Pro".
z
If you are installing ICC profile in Windows, click [Advanced
Setup] in the [Layout] tab, and then select [Disable ICM]
in [ICM Methods].

Setup Items
z
[RGB Color Setting]
Specifies the method for expressing the
colors processed using color matching.
z
Monitor - Auto
During color matching, represents
color by the most ideal method
suited to the document to be printed,
emphasizing compatibility with the
monitor (color temperature 6500 K).
Normally use this setting.
z
Monitor - Perceptual
During color matching, represents the
color by the method emphasizing the
gradation suiting the natural image
of the photograph and compatibility
with the monitor (color temperature
6500K).
z
Monitor - Vivid
During color matching, represents the
color by the method emphasizing the
vividness suiting the images and text,
and compatibility with the monitor
(color temperature 6500K).
z
Monitor - light
During color matching, represents the
color by the method emphasizing the
gradation suiting the natural image
of the photograph and compatibility
with the monitor (color temperature
9300K).
z
Adobe RGB
Specify if you are using an input device
with AdobeRGB color characteristics.
z
sRGB
The sRGB colors within the printer's
color gamut are printed without any
modification. Only colors that fall
outside the printer's color gamut are
matched with the outer shell. Suitable
for matching specific colors.
z
[Black Finish]
Sets the black finish when printing in color.
Normally use Auto as is.