Oki Pro1040 - Printing with IPP

- 161 -
Using a Web Browser to Configure the Network Setup
Printing with IPP
Printing can be performed using IPP.

To enable IPP printing
1
Access the printer web page and log in
as an administrator.
2
Select [Admin Setup].
3
Select the following: [Network Setup] >
[IPP] > [Setting].
4
Follow the instructions that appear on
the display to configure the setup.
5
Click [Submit].

To set up the printer as an IPP
printer (Windows)
1
Click [Start] and select [Control Panel]
in [Windows System].
2
Select [View devices and printers] >
[Add a printer].
3
From the list of usable printers, select
[The printer that I want isn’t listed].
4
Select [Select a shared printer by
name].
5
Enter "http://<printer IP address>/ipp"
or "http://<printer IP address>/ipp/lp",
and then click [Next].
6
Click [Have Disk].
7
Insert the "Software DVD-ROM" into the
computer.
8
For [Copy manufacturer's files from],
enter one of the paths below, and then
click [Find].
z
PCL driver:
D:\Drivers\PCLXL
Memo
z
The above is an example when the DVD-ROM drive
is the D: drive.
9
Select the INF file, and then click
[Open].