Oki Pro1040 - Printer Driver Functions Table; Explanation of Functions; Windows PCL Printer Driver Functions

- 48 -
Printer Driver Functions Table
⿟
Printer Driver Functions Table
This section explains the convenient functions when printing from a PC.
Reference
z
For detailed explanations of the printer driver setup items, see "Online Help".
Explanation of Functions
Windows PCL Printer Driver Functions
[Setup] Tab
Item Description
Example Shows what printing results
will be based on current
settings. This example is just
an approximation and does not
indicate the exact actual number
of print pages and cut positions.
Paper settings Specifies, from among
registered paper settings,
which one should be applied for
printing.
Orientation Specifies the print orientation.
Copies Specifies the quantity to be printed.
Cut Mode Specifies the timing to cut roll paper
when cutting and printing on it.
Quality Specifies the resolution during
printing.
Screen Specifies the halftoning available
with the device.
User-defined
paper
Click when using the driver to
register paper settings to be
used for printing.
Paper interval
detection
Before printing to black mark or
die-cut labels, click to execute
learning on the device to
improve the print position before
starting.
Note that executing this function
will cause some paper to be used.
About Displays the printer driver
version information.
Default Restores default settings.
[User-defined paper]
Item Description
Paper Name Enter the name of the paper
settings you want to register.
Registered user-
defined paper
Shows a list of paper settings
that have been registered.
Size Specifies either millimeters
or inches as the unit for input
values.
Print position
correction
Adjusts the print start position
on the paper edge.
Cut position
correction
Adjusts the cut position when
cutting and printing roll paper.
Media Form Specifies the paper setting type
to be registered.
Size input items change in
accordance with this setting.
Media Type Specifies the paper type.
Media Weight Specifies the paper thickness.
Sensor settings Specifies the settings, from
among those registered on the
device, to be used for printing.
Sensor
Adjustment
Click to calibrate the gap of
black mark or die-cut labels, and
register the results as device
sensor settings.
This button is not displayed for
media forms that do not require
calibration.
Printer
information
acquisition
Obtains, from devices, the
names of settings registered as
sensor settings and the names
of user types registered as
paper types, and reflects them
in the sensor settings and paper
type list on the printer driver.