Oki Pro1040 - Adjusting Fine Lines; Using Printer Fonts

- 82 -
Fine Quality Printing
Adjusting Fine Lines
You can prevent misaligned lines being printed
when ultra-fine lines are specified from the
application.
This function is normally ON.
Memo
z
Depending on the application, bar code and other intervals
will narrow. In this case, turn OFF the function.

Windows PCL Printer Driver
1
Open the file to be printed.
2
Select [Print] in the [File] menu.
3
Click [Preferences] (or [Properties]).
4
On the [Extend] tab, click [Advanced].
5
Select [Adjust ultra fine lines]. Next,
select [Off] for [Settings], and then
click [OK].
6
Print.
Using Printer Fonts
You can print by replacing TrueType fonts with
printer built-in fonts.
Note
z
The font replacement function stores the document
fonts, but font designs cannot be reproduced. If it is
necessary to print font designs accurately, disable the font
replacement function.
z
In some applications, the font replacement function may
not work properly.

Windows PCL Printer Driver
1
Open the file to be printed.
2
Select [Print] in the [File] menu.
3
Click [Preferences] (or [Properties]).
4
Click the [Extend] tab, and then select
[Fonts].