- 155 -
Using a Web Browser to Configure the Network Setup
Item List
◎
: Appears for a person logged in as a printer
administrator.
View Information
Item Description
Status Shows the current printer status. All warnings
and errors generated by the printer are shown
as "problem information". You can also check
the operational status of each network service,
a configuration list, and the IP address assigned
to the printer. For information about the status
window, see
"To check using the "Status Screen""
(P.157)
.
Tray Count Shows the print count.
Supplies Life Shows the remaining life of consumables.
Usage Report Shows usage reports.
Network Can be used to check general information, TCP/
IP status, maintenance information, and other
network-related setup information.
System Shows versions, memory capacity, flash memory
capacity, and system related information.
Print Information
◎
Item Description
Information
Print
Can be used to configure print and check
information about the network, the font list, and
other printer settings.
Printer Menu
◎
Item Description
General
Printer
Settings
Can be used to configure the printer name, asset
number, installation location, and other printer
settings.
Unwinder
Config
You can do settings related to the unwinder and
the paper loaded in the unwinder.
Cutter Setup You can set the cutter operations and the cutting
interval. Appears when the unwinder is mounted.
System
Adjust
Can be used to configure the power save time, and
for clearing warnings, timeout printing, and other
printer operations.
Print Adjust Can be used to configure print position adjustment,
print quality, and to adjust other settings.
Unit of
Measurement
You can set the units that are displayed.
Admin Setup
◎
Item Description
Network
Setup
Can be used to configure TCP/IP and other protocol
settings.
Print Setup Can be used to configure toner saving and other
printer settings.
PCL Setup Can be used to configure PCL font and other PCL
settings.
Color Setup Can be used to configure PostScript settings for
the CMYK data conversion process and other color
settings.
Management Can be used to configure the power setup, job
cancel setup, and other printer settings.
To Next Page
Loading...
