- 127 -
IPv6
IPv6
This printer is compatible with IPv6, and the
IPv6 address is acquired automatically. IPv6
addresses cannot be set manually.
The device is compatible with the following
protocols.
z
Printing:
- LPR
- IPP
- RAW
(
Port9100
)
- FTP
z
Setup:
- HTTP
- SNMPv1/v3
- Telnet
Checking the IPv6 Address
IPv6 addresses are allocated automatically.
1
Access the printer web page and select
[View information].
Memo
z
Refer to “Using a Web Browser to Configure the
Network Setup” (P.153) regarding the printer web
page.
2
Select [Network] > [TCP/IP].
Memo
z
If all the global addresses are displayed as "0", it is
possible an error has occurred in the router being used.
Reference
z
Press the scroll button or , and then select [Print
Information] > [Configuration] to check the IPv6 address
using the configuration report. For reports and information
about how to print them, see “Printing Configuration
Information” (P.130).
To Next Page
Loading...
Need help?
General
