- 126 -
Using DHCP
To use the printer in a BOOTP
environment
To use the printer in a BOOTP environment,
select [BOOTP] as the IP address setting
method.
1
Access the printer web page and log in
as an administrator.
2
Select [Admin Setup].
3
Select [Network Setup] > [TCP/IP] >
[Change Settings] > [Get IP address
automatically (BOOTP)].
4
Click [Submit].
Memo
z
Refer to “Using a Web Browser to Configure the Network
Setup” (P.153) regarding the printer web page.
To Next Page
Loading...
