- 178 -
Using a Web Browser to Configure the Network Setup
Using SNMPv3
This printer implements an SNMPv3 compatible
agent.
You can use an SNMPv3 compatible SNMP
manager to encrypt printer administration with
SNMP for greater security.
1
Log in as an administrator.
Reference
z
See "Logging in as an Administrator" (P.154).
2
On the [Admin Setup] tab, click
[Network Setup].
3
Click [SNMP] > [Settings].
4
Select the check box of the SNMP
version to be used in [STEP1], and then
click [To STEP2].
Memo
z
If [SNMPv3] is selected, you will not be able to view
or configure settings with SNMPv1. If [SNMPv3+v1]
is selected, you will be able to view settings with
either SNMPv1 or SNMPv3, but you can configure
settings using SNMPv3 only.
5
In [STEP2], enter an SNMPv3 user
name for [User Name].
6
Enter the passphrase for verification
in [Passphrase] for [Authentication
Settings].
To Next Page
Loading...
