Oki Pro1040 - Calibrating the Gap Sensor

- 40 -
Calibrating the Sensor
18
After sensor calibration is complete,
press the <OK> button.
Calibrating the Gap Sensor
You can adjust the distance between die cut
labels using the gap sensor.
1
Press the <Fn> key.
The numerical values input screen will
be displayed.
2
Press <8>, <9>, <1> (function
numbers), and then press the <OK>
button.
3
Select [3. Die-cut Label (Gap)], and
then press the <OK> button.
4
Press the <ON LINE> button to return
to the standby screen.