Oki Pro1040 - Page 180

- 180 -
Using a Web Browser to Configure the Network Setup

To configure IEEE802.1 settings
1
Log in as an administrator.
Reference
z
See "Logging in as an Administrator" (P.154).
2
On the [Admin Setup] tab, click
[Network Setup].
3
Click [IEEE802.1X].
Reference
z
If PEAP is to be used, proceed to "

To use PEAP".
If EAP-TLS is to be used, proceed to "

To use EAP-
TLS".

To use PEAP
4
For the [IEEE802.1X] setting, select
[Enable].
5
For [EAP Type], select [PEAP].
6
In [EAP User], enter the user name.
7
In [EAP Password], enter the password.
8
Select the [Authenticate Server] check
box.