- 181 -
Using a Web Browser to Configure the Network Setup
9
Click [Import of CA Certificate].
Memo
z
If the [Not authenticate Server] check box is
selected, import of a CA certificate is not required.
If the [Not authenticate Server] check box is
selected, there is no confirmation to determine if
the connection is to a properly authenticated server.
This displays the "Import of CA Certificate"
screen.
10
Enter the file name of the CA certificate,
and then click [OK].
Memo
z
The imported CA certificate is a certificate of the
server certificate issuing authority of the RADIUS
server.
z
Supported import file formats are PEM, DER, and
PKCS#7.
The CA certificate is imported by the printer.
11
Click [Submit].
12
Settings are saved on the printer and
the network function is restarted.
When the standby screen appears on the
control panel, turn off the printer.
Reference
z
For information about how to turn off the printer,
refer to the "Setup Guide".
z
Advance to "To connect the printer to an
authentication switch" (P.183).
To use EAP-TLS
4
For the [IEEE802.1X] setting, select
[Enable].
5
For [EAP Type], select [EAP-TLS].
6
In [EAP User], enter the user name.
7
Select the [Not use SSL/TLS Certificate
for EAP authentication] check box.
8
Click [Import of Client Certificate].
This displays the "Import of Client
Certificate" screen.
9
Enter the file name of the client
certificate.
Memo
z
The importable certificate file format is PKCS#12.
To Next Page
Loading...
