- 182 -
Using a Web Browser to Configure the Network Setup
10
Enter the client certificate password,
and then click [OK].
The client certificate is imported by the
printer.
11
Select the [Authenticate Server] check
box.
12
Click [Import of CA Certificate].
Memo
z
If the [Not authenticate Server] check box is
selected, import of a CA certificate is not required.
If the [Not authenticate Server] check box is
selected, there is no confirmation to determine
if the connection is to the correct authenticated
server.
This displays the "Import of CA Certificate"
screen.
13
Enter the file name of the CA certificate,
and then click [OK].
Memo
z
The imported CA certificate is a certificate of the
server certificate issuing authority of the RADIUS
server.
z
Supported import file formats are PEM, DER, and
PKCS#7.
The CA certificate is imported by the printer.
14
Click [Submit].
15
Settings are saved on the printer and
the network function is restarted.
When the standby screen appears on the
control panel, turn off the printer.
Reference
z
For information about how to turn off the printer,
refer to the "Setup Guide".
z
Advance to "To connect the printer to an
authentication switch" (P.183).
To Next Page
Loading...
