- 103 -
Adjusting Color with the Control Panel
3
Press the scroll button or to specify
a value that is larger than the current
value, and then press the <OK> button.
Confirm there is a checkmark ( ) to
the left of the selected value.
Memo
z
Select +1 to +3 to make density darker, or -1 to -3
to make it lighter.
4
Press the <ON LINE> button to return
to the standby screen.
5
Press the <Fn> key, and then press
<3>, <0>, <0>, <OK>.
6
Check that [Execute] has been selected,
and press the <OK> button.
7
The display will return to the standby
screen.
8
Print.
If you are not satisfied with the density,
repeat steps 1 to 6 of this procedure.
To Next Page
Loading...
