- 166 -
Using a Web Browser to Configure the Network Setup
5
Select [Windows Firewall with Advanced
Security] > [Windows Firewall with
Advanced Security - Local Group Policy
Object], right-click [Connection Security
Rules], and then select [New Rule].
6
Select [Custom], and then click [Next].
7
Select Endpoint 1 and 2. Configure as
required, and then click [Next].
8
Select [Require authentication for
inbound connections and request
authentication for outbound
connections], and then click [Next].
9
Select [Advanced], and then click
[Customize].
10
In the [First authentication] section,
click [Add].
11
Select [Preshared Key] and enter the
key, and then click [OK].
To Next Page
Loading...
