Oki Pro1040 - Page 25

- 25 -
Loading Media
4
Slide roll paper onto the Roll Paper
Holder shaft as far as it will go.
Note
z
Make sure to slide the roll paper as far as it will go.
Insufficiently sliding the roll paper can adversely
affect print position accuracy.
z
Take care to avoid pinching your fingers or hands
when sliding the roll paper.
5
Rotate the Roll Paper Holder Knob to fix
the roll paper core in place.
Note
z
Rotate the Roll Paper Holder Knob until it clicks.
6
Aligning the Flange with the Roll Paper
Holder shaft as shown in the illustration,
attach the Flange.
7
Slide the Flange as far as it will go in
accordance with the roll paper width.
Note
z
Slide the Flange up to the side of the loaded roll
paper.
z
Take care to avoid pinching your fingers or hands
when attaching the Flange.