- 36 -
Calibrating the Sensor
8
Select a registration location (a) for
the adjustment, and then enter a
registration name (b).
(b)
(a)
Memo
z
You can enter up to eight alphanumeric English
characters for the registration name.
9
Click [Next].
This starts the sensor adjustment and
displays a wait message.
10
When the completion screen appears,
click [Complete].
Memo
z
The results of adjusting the sensor are registered
on the printer. In [Sensor settings] in [User-defined
paper] in the printer driver, you can specify the
number registered in the printer for the adjustment
results and whether to apply it when printing. By
standardizing the registration numbers of the sensor
adjustment results, you can get the same print
results by specifying the same number in [Sensor
settings] in the printer driver for any printer. This is
useful when printing on the same media on multiple
printers.
11
To register new settings, click [Add] or
click [Overwrite] to select paper that is
already registered.
12
Click [OK] or [Close] as many times
as necessary to exit the “Printing
preferences” screen.
13
Open the file to be printed.
14
Specify a registered paper size, and
then print.
To Next Page
Loading...
