- 44 -
Detecting the Interval between Pages
When executing from the control
panel
Detect the paper gap and black mark interval
from the control panel.
1
For black mark media, execute steps
1 to 11 in “Calibrating the Black Mark
Sensor” (P.38).
For gap media, execute steps 1 to 13 in
“Calibrating the Gap Sensor” (P.40).
2
Press the <Fn> key.
3
Press <8>, <9>, <4> (function
numbers) and then press the <OK>
button.
4
Select [Execute], and then press the
<OK> button to start paper interval
detection and close the dialog box.
To Next Page
Loading...
