Oki Pro1040 - Page 62

- 62 -
Table of Setting Items in the Control Panel Menu Screen
z
Shaded areas are factory-set values.
Item Value Description
Transfer
Setting
Cyan Transfer
Setting
0
+1
+2
+3
-3
-2
-1
Lower the setting value if lateral-stripe white dots and
dark streaks appear for cyan, green and blue toner.
Raise the setting value if the high-density portion of
cyan, green and blue is thinner.
Magenta Transfer
Setting
0
+1
+2
+3
-3
-2
-1
Lower the setting value if lateral-stripe white dots and
dark streaks appear for magenta and/or red toner.
Raise the setting value if the high-density portion of
magenta and/or red is thinner.
Yellow Transfer
Setting
0
+1
+2
+3
-3
-2
-1
Lower the setting value if lateral-stripe white dots and
dark streaks appear for yellow toner.
Raise the setting value if the high-density portion of
yellow is thinner.
Black Transfer
Setting
0
+1
+2
+3
-3
-2
-1
Lower the setting value if lateral-stripe white dots and
dark streaks appear for black toner.
Raise the setting value if the high-density portion of
black is thinner.
White Transfer
Setting
*1
0
+1
+2
+3
-3
-2
-1
Lower the setting value if lateral-stripe white dots and
dark streaks appear for white toner.
Raise the setting value if the high-density portion of
white is thinner.
DV Roller Cleaning 1 On
Off
Adjust the toner disposal threshold.
On:
Image quality priority
Off:
Toner life priority
DV Roller Cleaning 2 Mode 1
Mode 2
Off
May be effective against lateral striping caused by
variations in ambient temperature and/or humidity. Try
mode 2 if desired results are not produced by mode 1.
*1: Displayed with Pro1050 only.