- 86 -
Adjusting the Print Position on the Paper
2
If you are actually printing more than
two sheets consecutively, then next, do
the following adjustment.
(Improve the accuracy of the function
for learning the position that printing
starts)
(1)
In the driver’s print settings, set [To
specify the number of pages per
cut] in [Cut Mode] and set [20] in
[Page(s) per cut].
(2)
Print 20 pieces as a test print (*).
* These printouts are test prints
for adjusting positions, so throw
them away when you are done.
3
The adjustments are complete when
printing is done in the position you
want.
Reset the cutter settings, and then start
printing.
To Next Page
Loading...
Need help?
General
