Olivetti PR2 plus - Page 104

5-20 Service Manual
XZAC4219-05
XX X
Front pressure rollers
not adjusted
correctly.
Adjust the pressers of the front rollers. See “Adjusting the
front pressure rollers” on page 6 - 10
X
Rear roller motor not
working
Replace the motor. See “Disassembling/reassembling
pressure roller unit” on page 7 - 20
Fault
Possible cause Solution
The machine does not introduce/eject the document The document is fed crookedly The document iswrinkled The document has irregular line feeds