2-14 Service Manual
XZAC4219-05
FINAL TESTING WITH PRINTER CONNECTED TO SYSTEM (ONLINE)
After verifying that the configuration parameters are correct, connect the printer to the system and activate the test
for all the functions present in the printer configuration.
OPERATOR INFORMATION
At the end of installation, the field engineer must provide the Operator with various information in order to use the
machine and to replace the cartridge and to eliminate paper jams without any problems.
For this purpose, a practical demonstration of the following operations is recommended:
• Use of the console, interpretation of the error messages and, where possible, unblocking of the machine.
Refer to section “OPERATING CONTROLS” on page 3 - 1.
• Explain the method of insertion of the paper
• Replacement of the ribbon cartridge.
• Extraction of a jammed document from the machine using the mechanism lift lever.
Stress the importance of correct internal ventilation and that the various ventilation slots of the printer must not be
blocked by forms or documents.
Remind the operator that correct use of the machine guarantees optimal functioning in time. If faults occur, contact
technical support immediately.
To Next Page
Loading...
