Olivetti PR2 plus - Firmware Loading Operations; The Application Toolbox

XZA4219-05 Service Manual
A-5
The reference standards for the printable optical characters are as follows:
Relationship between writing styles and emulation environment:
THE APPLICATION TOOLBOX
Using the Toolbox application (version 1.10_08 and later), you can obtain from the printer a series of data relating to
its use.
This data relates both to the life of the printer (non-resettable data), and the life of any parts replaced following
technical interventions (resettable data).
NOTE: the Toolbox application is available on request. Contact Technical Support.
Mail box: Banking.Printers@Olivetti.com
ù
Firmware loading operations
On all models of the PR2 Plus, to update the firmware release, the Toolbox (version 1.10_08 and higher) must be
installed.
NOTE: before installing the Toolbox, it is essential to remove any previous installation version from
the Host.
ù
For reasons of speed, it is advisable to update the firmware release using the USB port.
Font Coding standard Dimensions/std form Print specifications
OCR A EUROBANKING ISO 1073/1 ISO 1831
OCR B EUROBANKING ISO 1073/2 ISO 1831
Emulations Writing styles Selection
PR50/PR2845
HSD, DRAFT, NLQ1, NLQ2, LQ2, OCRA, OCRB FROM SET-UP
DRAFT, NLQ1 FROM LINE
PR50/PR40+
HSD, DRAFT, NLQ1, NLQ2, LQ2, OCRA, OCRB FROM SET-UP
DRAFT, NLQ1, OCRA, OCRB FROM LINE
PR2 E
HSD, DRAFT, NLQ1, NLQ2, LQ2, OCRA, OCRB FROM SET-UP
HSD, DRAFT, NLQ1, NLQ2, LQ2, OCRA, OCRB,
ITALICO DRAFT ITALICO NLQ1, ITALICO
NLQ2, ITALICO LQ2
FROM LINE
IBM PP II/X24
HSD, DRAFT, NLQ1, NLQ2, LQ2 FROM SET-UP
DRAFT, NLQ1 FROM LINE