Olivetti PR2 plus - Disassembling;Reassembling Pressure Roller Unit

7-20 Service Manual
XZAC4219-05
Disassembling/reassembling pressure roller unit
1. Raise the upper cover.
2. Raise the print unit. See the section “Lever for lifting the upper part of the mechanism” on page 3 - 4.
3. Unscrew the four screws (1).
4. Remove the pressure roller unit (2), extracting it downwards and being careful not to lose the component (3).
Figure 7 - 24 Disassembling the pressure roller unit
1
1
2
3