XZAC4219-05 Service Manual
1-11
1 Parallel interface connector 10
Analogue signal connector of the card for MICR
configuration
2 Serial interface connector 11 Services motor connector
3 Printhead connector 12 Carriage reset photosensor connector
4 Printhead connector 13
SBI signal connector of the card for MICR
configuration
5 Alignment device photosensors 14 Power unit connector
6 Console connector 15
Signal connector for cards for Horizontal Magnetic
and MICR configurations
7 Carriage motor connector 16
Power and signals connector for Horizontal
Magnetic and MICR configuration cards
8 Open/close cover sensor connector 21 USB port connector (to host)
9 Paper motor connector 25
Expansion board connector
(for optional Ethernet LAN Card)
To Next Page
Loading...
