4-14 Service Manual
XZAC4219-05
ISO SET
OLI-UNIX
ISO 8859/1
ISO 8859/2
ISO 8859/5
ISO 8859/6
ISO 8859/7
ISO 8859/8
ISO 8859/9
ISO 8859/15
If the character generator selected has been IBM
CHAR SET --> ISO
CHAR DEFINITION
LQ
Selection of print definition.
DRAFT *
OCR-A
OCR-B
CPI
5
Selection of printing pitch..
10 *
12
15
16,6
17,1
COMPRESSED
17,1
Defines the spacing selected with ESC >
16.6 *
VERTICAL RESOL.
1/240 inch *
Selection of vertical resolution.
1/216 inch
LF + CR
N * Activate (Y) or disactivate (N) automatic execution of a
carriage return (CR) every time a line feed command
(STATION1) is received.
Y
LINE LENGTH
90 *
Selection of the maximum width of the print line,
expressed in number of characters at 10 cpi.
94
REPLY SYNCHRON.
N *
Management of the DSR in transmission.
Y
STATUS REQUEST
NO WAIT * This parameter determines the timing of the status
reply to an ESC j command. Selecting NO WAIT,
the reply will be provided as soon as possible and in
parallel with printing or paper movements. Selecting
WAIT, the status reply will be provided at the end of
printing.
WAIT
OPTION HOR. MSRW
This is a warning message related to the Horizontal Magnetic option. Refer to
section “If the horizontal magnetic option is present” on page 4 - 16
SAVE PARAMETERS
NO
Saves (Y) or cancels (N) the values configured in this
area of the programming menu.
YES *
Parameter Values possible Description
To Next Page
Loading...
