Omron 3G3MV-PDRT2 - Page 180

Chapter 7
7-30
Configurator Settings
2.Double-click the field to be set, or select the field to be set and click the Edit Button to display the
setting window.
03 Terminal S4 (multi-function
input 4)
Terminal S4 (multi-function
input selection 2)
Terminal 4 (multi-function con-
tact input 2)
04 Terminal S5 (multi-function
input 5)
Terminal S5 (multi-function
input selection 3)
Terminal 5 (multi-function con-
tact input 3)
05 Terminal S6 (multi-function
input 6)
Terminal S6 (multi-function
input selection 4)
Terminal 6 (multi-function con-
tact input 4)
06 Terminal S7 (multi-function
input 7)
Terminal S7 (multi-function
input selection 5)
Terminal 7 (multi-function con-
tact input 5)
07
Terminal 8 (multi-function con-
tact input 6)
No. Details
3G3MV 3G3RV/3G3PV 3G3FV
IN Tab Page in the Edit Device
Parameters Window
Double-click the selected field, or click the Edit Button.
Set the name of the connected device.
(Refer to 7-2-11Connected Device Comment.)
Select either Time or Count as the detection mode.
Set the monitor time (in seconds) if using the
cumulative ON time function.