Chapter 7
7-67
Configurator Settings
7-5-4 Operation Time Tab Page
Note The following table shows the meanings of the values set in the No. field
Item Details Reference
No. Refer to the following table for meanings in the No. field.
(For details, refer to 7-2-5 Operating Time Monitor Func-
tion.)
Note: When the operating time exceeds the monitor value,
an error icon is displayed to the left of the corresponding
setting in the No. field.
7-2-5 Operating Time Mon-
itor Function
Equipment Name Displays the name of each device.
Response Time Displays the operating time of each device.
Peak Value Displays the maximum value of the operating time of each
device.
No. Operating time measurement trigger
Conditions for starting measurement Conditions for ending
measurement
00 Multi-function contact output: ON Input 4: ON
01 Multi-function output 1: ON Input 5: ON
02 Input 2: ON Input 3: ON
03 Input 4: ON Input 5: ON
04 Input 0: ON or Input 1: ON
or when a forward/reverse run command is sent
Input 4: ON
05 Input 0: ON or Input 1: ON
or when a forward/reverse run command is sent
Input 5: ON
To Next Page
Loading...
