Chapter 7
7-66
Configurator Settings
7-5-3 IN Tab Page
Note The following table shows the meanings of the values set in the No. field
Item Details Reference
No. Refer to the following table for meanings in the No. field.
Note: When the present value for the maintenance counter
(cumulative ON time or contact operations count) exceeds
the monitor value, an error icon will be displayed to the left
of the corresponding No. setting (No. 05 in the above screen
example).
---
I/O Comment Displays the user-defined connected device comment for
each input terminal.
7-2-11 Connected Device
Comment
Maintenance
Counter
Displays the present value of the maintenance counter for
each input terminal.
Note: The cumulative ON time (in seconds) or the contact
operations count (number of times) is displayed.
7-2-6 Cumulative ON Time
Monitor
7-2-7 Contact Operations
Monitor
No. Details
3G3MV 3G3RV/3G3PV 3G3FV
00 Multi-function input 1 Forward/stop Forward/stop
01 Multi-function input 2 Reverse/stop Reverse/stop
02 Multi-function input 3 Multi-function input selection 1 Multi-function contact input 1
03 Multi-function input 4 Multi-function input selection 2 Multi-function contact input 2
04 Multi-function input 5 Multi-function input selection 3 Multi-function contact input 3
05 Multi-function input 6 Multi-function input selection 4 Multi-function contact input 4
06 Multi-function input 7 Multi-function input selection 5 Multi-function contact input 5
07
Multi-function contact input 6
To Next Page
Loading...
