Chapter 7
7-65
Configurator Settings
7-5-2 OUT Tab Page
Item Details Reference
No. The settings in the No. field are as follows:
00: Multi-function contact output, 01: Multi-function output 1,
02: Multi-function output 2
Note: When the present value for the maintenance counter
(cumulative ON time or contact operations count) exceeds
the monitor value, an error icon will be displayed to the left
of the corresponding No. setting (No. 01 in the above screen
example).
---
I/O Comment Displays the user-defined connected device comment for
each output terminal.
7-2-11 Connected Device
Comment
Maintenance
Counter
Displays the present value of the maintenance counter for
each output terminal.
Note: The cumulative ON time (in seconds) or the contact
operations count (number of times) is displayed.
7-2-6 Cumulative ON Time
Monitor
7-2-7 Contact Operations
Monitor
To Next Page
Loading...
