Omron fh-1 series User Manual

4 Setting the Controller
4 - 32
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
 The effect of Parallel processing on the Operation mode
• Measurement processing speed will be faster because all cores are used for one measurement when
Parallel processing is ON.
However, processing time may vary greatly due to CPU core scrambling.
This may cause a delay in the timing of logging operations and display updates.
• One CPU core is used at one measurement processing when Parallel processing is OFF. There will
be less variation in processing speed because separate cores will be assigned to measurement and
other processes.
• It is possible to affect each of Operation mode functions when Parallel processing is ON as described
below.
Restrictions
Operation mode Parallel processing is ON
Standard (Operation mode) The time for one measurement is fastest for all modes.
Double Speed Multi-input Highest measurement count per time unit.
Non-stop Adjustment It is possible the measurement on the Non-stop Adjustment side or
transfer of the Non-stop data to affect to the measurement of the
running side.
Multi-line Random trigger Measurement of the other line can affect the measurement pro-
cessing time.

Omron fh-1 series Specifications

General

Brand	Omron
Model	fh-1 series
Category	Machine Vision Systems
Language	English