Omron fh-1 series - Page 244

6 Performing Measurement and Adjustment
6 - 14
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
6 When you use the function to switch the saving folder, set the switching conditions.
• [Save to Memory + File] Setting Example and Save Destination
• [Save to Memory + FTP Server] Setting Example and Save Destination
Setting item Set value [Factory default] Description
Switch saving
folder by scene
• Checked
• [Unchecked]
If this is checked, folders that correspond to scene numbers
are automatically created and image files are divided by
scene and saved.
Use scene name
as folder names
• Checked
• [Unchecked]
If this is checked, folders to which image files are allocated
are named using the scene names and scene group names
at the time of measurement execution.
If a scene name contains a character not supported for folder
names, a logging error is generated when logging is exe-
cuted.
The following symbols can not be used in the file or folder
names.
¥ / : , ; * ? " < > |
If these symbols are used, a logging error is generated when
logging is executed.
Switch saving
folder by judge
• Checked
• [Unchecked]
If this is checked, OK/NG folders are automatically created
and image files are divided by the overall judgment and
saved.
Setting example Destination
• Folder name: USB disk
• Prefix: image_
• [Switch saving folder by scene]: Selected
• [Switch saving folder by judge.]: Selected
The settings in the example on the left are applied as
shown below.
• OK image save destination:
\USBDisk\S000-000\OK\image_(Measurement
ID).IFZt
• NG image save destination:
\USBDisk\S000-002\NG\image_(Measurement
ID).IFZ
Setting example Destination
• IP address: 10.5.6.100
• User name: OMRON
• Password: abc
• Port number.: 21
• Connection method: Active
• Folder name: Logging
• Prefix: image_
• [Switch saving folder by scene]: Selected
• [Switch saving folder by judge]: Not selected
With left sample settings, the file will be saved as below.
• When the current directory which FTP server specifies
is "C:\Data\RAMDisk".
C:\Data\RamDisk\Logging\S000-000\image_(Mea-
surement ID.ifz)