Omron fh-1 series - Page 359

8 - 65
8 Setting Windows
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
8-3 Arranging Windows [Layout Functions]
8
8-3-24 Simple Data Grid Window (MDI_SimpleDataGrid.dll)
Important
If the size of the data set exceeds 100000 characters, the message "Failed to save setting
data. Setting data is too long." will be displayed.
Additional Information
You can also adjust the cell height/width by dragging the grid lines.
Font Settings
Size 1 to 100 [12] Sets the font size of the cell.
Style • Bold
• Italic
• Underline
• Strikethrough
Sets the font style of the cell.
Text color R: 0 to 255 [0]
G: 0 to 255 [0]
B: 0 to 255 [0]
Sets the text color of a cell.
Variable [Blank] Selects this to make the text color of the cell specified by a vari-
able.
If variable is set here, the “Text color” setting is disabled.
Background color R: 0 to 255 [255]
G: 0 to 255 [255]
B: 0 to 255 [255]
Specifies the background color of a cell.
Variable [Blank] Select this to make the background color of a cell specified by
a variable.
If variable is set here, the "Background color" setting is dis-
abled.
Icon Description
After selecting the cell, click this icon or right-click and click [Copy] from the displayed
menu, or press [Ctrl+C] to copy the contents of the cell.
After copying, select the cell you wish to paste to. Click this icon or right click and click
[Paste] from the displayed menu, or [Ctrl+V] to make the "Value type", "Value", Font
"Size", "Style", "Text color", "Text color variable", "Background color" and "Background
color variable" to be the same as the copy source cell.
After copying, select a cell, click this icon, or right click and click [Format Painter] from
the displayed menu, or [Ctrl+F] to make the font "Size" and "Style", "Text color", "Text
color variable", "Background color" and "Background color variable" to be the same as
the copy source cell.
After copying, select a cell, click this icon, or right click and click [Paste width] from the
displayed menu, or [Ctrl+W] to make the column width to be the same as the copy
source cell.
After copying, select a cell, click this icon, or right click and click [Paste height] from the
displayed menu, or [Ctrl+H] to make the height to be the same as the copy source cell.
After selecting the cell, click this icon or right-click and click [Clear] from the displayed
menu, or press [Delete] to return the cell to its initial settings.
However, note that the cell width and height cannot be returned to their initial settings.
Setting item
Setting value
[Factory default]
Description