Omron fh-1 series - Page 562

Appendices
A - 44
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
• CheckAccessControl
• Parameters
• Return value
For an operation that is not permitted for the logged in user, returns 0.
For an operation that is permitted for the logged in user, returns value other than 0.
• ClearImageLogCount
• Parameters
None.
• Return value
If the image logging count is cleared successfully, returns 0.
Otherwise, returns value other than 0.
• ClearSecurityData
• Parameters
• Return value
If it succeeded, returns 0.
Otherwise, returns value other than 0.
• ClearSettingData
• Parameters
None.
• Return value
If it succeeded, returns 0.
Otherwise, returns value other than 0.
Checking Operation Restrictions
name Operation identifier name
Clearing the Logging Count Information.
Clearing Security Related Parameters
_userName User name executed
_password User password executed
mode Data to be cleared
Bit 0: User account
Bit 1: Operation restriction contents
Bit 2: Other
Clearing Setting Data in a Batch