Omron fh-1 series - Page 561

A - 43
Appendices
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
A-14 Operation log input information list
A
SetUnitDataN Sets processing unit data. ---
SetUnitDataN2 Sets processing unit data. ---
SetUnitDataS Sets processing unit data. ---
SetUnitDataS2 Sets processing unit data. ---
SetUnitFigure Sets the figure data for a processing unit.
*1
SetUnitTitle Sets a processing unit title name.
*1
SetUserAccount Sets a user account. Refer to Setting a User
Account (P.A-51).
StartRemoteOperation Starts remote operation. ---
SyncData Synchronizes the setting data between Core RA pro-
cesses.
Refer Synchronization of
Setting Data Between
CoreRA Processes
(P.A-51).
SystemReset Executes a system reset.
*1
UnLockMeasureStop Sets measurement trigger input to enabled. Refer to Setting Measure-
ment Trigger Input to
Enabled (P.A-51).
UserLogin Logs in as the specified user. Refer to Logging in as the
Specified User. (P.A-52).
UserLogout Logs out. Refer to Logging Out
(P.A-52).
*1. For details of Operation log input information list, refer to Macro Command Reference in the Vision System
FH/FZ5 Series Macro Customize Functions Programming Manual (Cat. No. Z367).
Name Description References