Omron fh-1 series - Page 565

A - 47
Appendices
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
A-14 Operation log input information list
A
• GetIoModuleIdent
• Parameters
• Return value
If the I/O module identifier name is acquired successfully (character string), returns 0.
Otherwise, returns value other than 0.
• GetSecurityParameter
• Parameters
• Return value
If it succeeded, returns 0.
Otherwise, returns value other than 0.
Getting an I/O Module Identifier Name
ioModuleNo I/O module number
0: Registers ParallelIo (Parallel I/O). (Fixed)
1: Registers any of the following I/O modules in the module communication system.
• SerialNormal: Serial non-procedure communication
• SerialNormal2: Serial non-procedure communication (Fxxx series method)
• SerialPlcLink: Serial PLC link (Omron PLC)
• SerialPlcLinkM: Serial PLC link (Mitsubishi PLC)
2: Registers any of the following I/O modules for Ethernet communication system
• TcpNormal: TCP non-procedure communication
• UdpNormal: UDP non-procedure communication
• UdpNormal2: UDP non-procedure communication (FXXX series method)
• UdpPlcLink: UDP PLC link (Omron PLC)
• UdpPlcLinkM: UDP PLC link (Mitsubishi PLC)
• TcpPlcLink: TCP PLC link (Omron PLC)
• TcpPlcLinkM: TCP PLC link (Mitsubishi PLC)
3: Registers one of the following I/O modules or no registration.
• EtherCAT: EtherCAT communication
• EtherNetIP: EtherNet/IP communication
Getting Security Related Parameters
_userName User name executed
_password User password executed
dataIdent Data identifier name
userLoginTimeout: Login timeout time (minutes)
data Acquisition data storage variable