Omron fh-1 series - Page 566

Appendices
A - 48
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
• IoInitialize
• Parameters
• Return value
If the specified I/O is initialized successfully, returns 0.
If initialization failed, returns value other than 0.
• LoadSecurityData
• Parameters
• Return value
If it succeeded, returns 0.
Otherwise, returns value other than 0.
• LockMeasureStop
• Parameters
• Return value
If it succeeded, returns 0.
Otherwise, returns value other than 0.
Executing I/O Initialization
ioIdent Initializing I/O module identifier name
• ParallelIo: Parallel I/O
• SerialNormal: Serial non-procedure communication
• UdpNormal: Ethernet UDP non-protocol communication
Loading Security Related Settings
_userName User name executed
_password User password executed
fileName Data identifier name
userLoginTimeout: Login timeout time (minutes)
data Path for ID to load
Setting Measurement Trigger Input to Disabled
timeout Timeout time