3 - 9
3 Basic Operations
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
3-2 Basic Knowledge about Operations
3
3-2-2 Inputting Text
1 Click [...] in the item in which a character string is to be set.
The soft keyboard is displayed.
2 Switch the tabs as needed and Click the character that is to be input.
Depending on the used languages settings (Refer to 4-1 Selecting Language [Startup Settings] on
page 4-2 in order to switch display languages, input characters using the following format.
After the language identifier surrounded by single-byte ¥ (yen) or single-byte \ (backslash) sym-
bols, detail the character to input.
Example: if the used language setting is Japanese, then [ ] will be displayed, and if this
is English, then [input character] will be displayed.
-----------------------------------------------
¥jpn¥ ¥eng¥input character
or
\jpn\ \eng\input character
-----------------------------------------------
Language identifiers:
jpn: Japanese
eng: English
chs: Simplified Chinese
cht: Traditional Chinese
deu: German
fra: French
ita: Italian
esp: Spanish
kor: Korean
vnm: Vietnamese
pol: Polish
• If a character string for the currently used language is not set, then English (eng) character
strings will be used.
• If a character string for the currently used language as well as one that supports English is
not set, then the input character string will be displayed as is.
• FH series sensor controller and the FZ5-1100 series sensor controller support 9 languages
(Japanese/English/simplified Chinese/traditional Chinese/German/French/Italian/Spanish/
Korean).
• FZ5-L series sensor controller and the FZ5-600 series sensor controller support 4 languages
(Japanese/English/simplified Chinese/traditional Chinese). (Refer to 1-1-2 Functional Com-
parison between the FH-series, FHV-series and FZ5-series Controllers on page 1-3)
3 Click [OK] after text has been entered.
The software keyboard is closed.
Operation Method
To Next Page
Loading...
