Oracle EXADATA X5-2 - Page 139

Remove the Right LED/USB Indicator Module
4.
Remove the fan modules from the server.
See “Remove a Fan Module” on page 67.
5.
Disconnect all cables from the front storage drive backplane.
See the procedures for your storage drive configuration in “Servicing the Storage Drive
Backplanes” on page 112.
6.
Disconnect the left LED indicator module cable and the right LED/USB indicator
module cable from the motherboard [1 and 2].
7.
Slide the disk cage assembly forward, and then gently lift the disk cage
assembly from the chassis [3].
Set the disk cage assembly on an anti-static mat.
8.
Remove the right LED/USB indicator module.
Servicing Components That Require Server Power-Off 139