Polaris RANGER XP 1000 2018-2019

7
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.
7.13
9. Install retaining ring
y
with sharp, square edge facing
away from U-joint into exposed groove.
10.Place larger adapter
u
with ID larger than yoke bore
on side with retaining ring.
11. Tighten clamp until other cap is below retaining ring
groove.
12.Install second retaining ring
i
with sharp, square
edge facing away from U-joint.
13.Verify the U-joint moves freely and does not bind.
FINAL DRIVE