2.12
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.
GREASE LUBRICATION POINTS
There are grease fittings at each A-arm pivot point, each rear stabilizer bar bushing, and on the propshaft yoke. Apply
grease until all traces of water have been purged out at each of these areas.
ITEM
METHOD RECOMMENDED LUBE
FREQUENCY
q
A-arm Pivot Bushings
Grease all fittings on
each side of the vehicle
Polaris All Season Grease
Grease fittings every 500 miles
(800 km); Grease before long
periods of storage, and after
thoroughly washing or
submerging the vehicle
w
Stabilizer Bar Bushings
e
Propshaft Yoke
Grease the fitting
(3 pumps maximum)
NON-CREW MODELS CREW MODELS
MAINTENANCE
To Next Page
Loading...
