Polaris RANGER XP 1000 2018-2019

10.24
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.
CAB ACCESSORIES REMOVAL /
INSTALLATION (PKG ONLY)
Overhead Light
1. Remove the roof headliner. Refer to “Roof Removal
/ Installation”page 10.21 procedure.
2. Disconnect the electrical harness connector to the
light.
3. Remove the fasteners holding the light assembly to
the roof.
4. For installation, reverse removal procedure.
Seat Heater
1. Remove the applicable seat.
2. The seat heater element is attached to the top of the
seat base. Remove the vinyl and foam on the seat
base.
3. Disconnect the electrical harness connector from the
heater element. Pull the adhesive backing off of the
seat to remove the heater element.
4. For installation, reverse removal procedure.
BODY / FRAME