INTRODUCTION MULTI GAUGE CONTROLLER
2. Information on possible damage to the device.
3. Information on correct handling or use. Disregarding safety notes can lead to malfunctions
or device damage.
4. Note. Indicates particularly important, but not safety-relevant information.
1.3.3 GENERAL SAFETY INSTRUCTIONS
The MG15 has been designed to maximally protect the user and his environment against burns or
electric shocks, mechanical hazards, high temperature and ire spreading out of the device. The
environmental conditions different from those speciied below may pose a threat to the user and
his environment:
• Use inside buildings.
• Elevation above sea level of up to 2000 metres.
• Temperature range of safe operation: 5°C do 40°C.
• Maximum relative humidity: 80% (to 31°C), decreased linearly down to max. 50% at 40°C.
• Fluctuations of supply voltage cannot exceed ±10% of the rated value.
• Protection class 1.
During all the operations carried out with the use of the device described in this manual, observe
the applicable safety regulations. Observe all the safety notes given in this document and forward
the information to all other users of the device. Pay particular attention to the following safety
notes:
Supply voltage.
Contact with live parts is extremely hazardous when any objects are introduced
or any liquids penetrate into the device.
Make sure that no objects enter through the vent holes of the device. Keep the
device dry.
Page 12 User manual rev. 03
To Next Page
Loading...
Need help?
General