STORAGE AND DISPOSAL MULTI GAUGE CONTROLLER
8 STORAGE AND DISPOSAL
8.1 PACKING
Please retain the original packaging. The packaging is required for storing the MG15 and for ship-
ping it to an authorized PREVAC service center.
8.2 STORAGE
The MG15 should only be stored in a dry room. The following requirements must be met:
PARAMETER VALUE
Ambient temperature -20...50°C
Humidity As low as possible. Preferably in an air-
tight plastic bag with a desiccant.
Table 8.1: Storage parameters
8.3 DISPOSAL
The product purchased by you was manufactured from recyclable materials. The product is marked
in accordance with European regulations pertaining to waste of electrical and electronic equipment
– WEEE2.
Waste of electrical and electronic equipment must not be thrown away together with regular do-
mestic waste. According to the European Union WEEE Directive, waste of electrical and electronic
equipment is subject to separate utilization procedures.
Page 120 User manual rev. 03
To Next Page
Loading...