INTRODUCTION MULTI GAUGE CONTROLLER
1.5.2 OPERATION
The device can be controlled in two ways:
• Manually on the display with touch panel.
• Remotely via RS232, RS485 or Ethernet, see chapter 6.
1.5.3 STANDARDS
• The MG15 conforms to the following standards and harmonised standards:
– PN-EN 61326-1:2013-06 (EN 61326-1:2013) - Electrical equipment for measurement,
control and laboratory use - EMC requirements - Part 1: General requirements.
– PN-EN 61000-6-4:2008/A1:2012 (EN 61000-6-4:2007/A1:2011) - Electromagnetic com-
patibility (EMC) – Part 6-4: General standards – Emission standard for industrial envi-
ronments.
– PN-EN 61010-1:2011 (EN 61010-1:2010) - Safety requirements for electrical equip-
ment for measurement, control and laboratory use - Part 1: General requirements.
– PN-EN 50581:2012 EN 50581:2012 - Technical documentation for the assessment of
electrical and electronic products with respect to the restriction of hazardous substances.
• Conforms to the essential requirements of the following directives
– EMC 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Coun-
cil of 26 February 2014 on the harmonisation of the laws of the Member States relating
to electromagnetic compatibility.
– LVD 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council
of 26 February 2014 on the harmonisation of the laws of the Member States relating
to the making available on the market of electrical equipment designed for use within
certain voltage limits.
– RoHS 2011/65/UE - Directive 2011/65/EU of the European Parliament and of the Coun-
cil of 8 June 2011 on the restriction of the use of certain hazardous substances in elec-
trical and electronic equipment Text with EEA relevance.
– WEEE 2012/19/UE - Directive 2012/19/EU of the European Parliament and of the Coun-
cil of 4 July 2012 on waste electrical and electronic equipment (WEEE) Text with EEA
relevance.
Page 18 User manual rev. 03
To Next Page
Loading...